Under excellent lubrication, the load is reasonable, and this rate is maintained during the operation period of all X-ring motorcycle chains. The single-switch power supply of X-ring motorcycle chains can manipulate the output of several axes together; Moreover, the mean transmission ratio can be maintained, the supporting force required is small, the working pressure on the shaft is also small, the friction damage of the rolling bearing can be reduced, the structure is compact, and the temperature, applicable oil and other extreme natural environmental standards can be used.

1. Clean X-ring motorcycle chains before measurement;

2. Surround the tested X-ring motorcycle chains on the two sprockets, and the upper and lower ends of the tested X-ring motorcycle chains shall be supported;

3. The X-ring motorcycle chains before measurement should stay for 1 minute under the condition of applying one-third of the limit tensile load;

No matter what kind of hoist sprocket is used, it must be used with the chain, and if the chain is damaged, the hoist sprocket must also be replaced. X-ring motorcycle chains manufacturers In order to make the chain drive system life reach the aspirational situation, which X-ring motorcycle chains is good? Be sure to maintain the parts in accordance with the specification, and try to keep the chain straight between the big tooth disc and the flywheel when changing speed.

X-ring motorcycle chains https://www.qj-chain.com/X-ring-motorcycle-chains.html